Call : (07) 3208 1158
CONSUMABLES
Plywood, Timbers and other Formwork Accessories
-
F17 plywood 1.20m x 1.80m
-
LVL 2.4m, 3.60m & 4.80m
-
Tie rods, anchor plates and nuts
-
Nails, conduit and cones, and more…
We have the answers
to your questions
Please send us a message and we will respond as quickly as possible.
GEOTECHNICAL SYSTEMS
The heart of the system is the self-drilling TITAN micropile that transfers loads to the subsoil. Micropiles can transfer tension, compression and cyclic loads and are used to secure structures.
ISCHEBECK can supply many different micropiles to suit different applications: anchorages, foundations, underpinning, slope stabilisation, tunnelling, mining, etc.
TITAN micropiles are approved according to National Technical Approval / Construction Technique Permit No. Z-34.14-209 issued by the Deutsches Institut für Bautechnik (DIBt) and are the only tubular grouted piles that can be used for permanent applications exceeding 100 years.
The following are just some of the convincing advantages of TITAN micropiles:
Advantages for designers
-
System approved in accordance with building legislation
-
Quick and easy planning
-
Diverse applications – even with difficult boundary conditions
-
Suitable for all soil types
Advantages for contractors
-
Standard installation method irrespective of type of application
-
Suitable for use on confined sites, too
-
Fast progress on site
-
Unaffected by changing soil conditions
-
No additional plant necessary
Advantages for clients
-
No ongoing costs for monitoring tests
-
Permanent corrosion protection
-
Highly reliable installation method
-
Avoids a major intervention in existing works
-
Economic system
The Titan System
- The original and best self-drilling bar system
- Fully researched, tested and manufactured in Germany
- Independently verified for 100-year permanent applications
for black finish bars. - Durability assured without the need for consideration or
sacrificial steel or coatings. - Full corrosion protection providerd through control of grout
cracking at design load. - The World leader for hollow bar geotechnical engineering
with yield capacities from 190 to 6,465 kN.
WHY US?
-
All equipment manufactured in Germany
-
140 years of manufacturing
-
Economic, reliable & safe solutions
-
We can handle projects of any scale or complexity
One installation method
for all applications
Irrespective of the ground conditions and the particular application, TITAN micropiles are always installed using the same method.
- Can also be used in changing soil conditions
- No additional drilling tools required
- No multi-stage grouting
- Installed according to DIBt approval Z-34.14-209
- One operation – two steps
Step 1
Direct drilling
- A cement suspension is injected through the hollow steel bar and forced out through the flushing apertures in the drill bit.
- The cement suspension functions as a flushing and drilling fluid to prevent the sides of the hole from collapsing.
- The cement forms a mechanical interlock with the microstructure of the soil (filter cake).
Step 2
Dynamic grouting
- The fluid of step 1 is displaced by a stiff cement suspension (w/c ratio = 0.4–0.5).
- A grout body forms, creating a high shear bond with the soil.
Application areas
Geotechnical systems
Plant
on site
Various types of equipment can be used to install TITAN micropiles depending on the size of the TITAN hollow steel bar, the type of application and the restrictions on the building site.
Installation with hand-held hammer drill
For the smaller hollow steel bars, TITAN 30 to TITAN 40.
Installation with anchor drilling rig
Universal crawler track-mounted units for installing all TITAN hollow steel bars.
Installation with excavator-mounted drilling plant
For the smaller to moderately sized hollow steel bars and especially suitable for building sites with difficult access.
your contact
for geotechnical systems solutions
If you have any further questions please feel free to contact us.
Ischebeck Titan (Australia) Pty Ltd
Richard Austin
Mobile: +61 468 848 300
Email: richard.austin@ischebeck-titan.com.au
Office: 197 Queens Road, Kingston, QLD 4114
Tom Glasby
Mobile: +61 423 298 033
Email: tom.glasby@ischebeck-titan.com.au
Office: 197 Queens Road, Kingston, QLD 4114