TITAN props
Variable. Economical. Adaptable.

Whether you need telescopic props or aluminium system supports, the ISCHEBECK TITAN range covers the whole spectrum of on-site needs – from single slabs to multiple slab high rises. Our many different props in steel or aluminium with various lengths and permissible loads mean that you always find the right support for your project.

Formwork solutions from ISCHEBECK TITAN are compatible, and the materials used, e.g. steel, aluminium and plastics, ensure that those solutions are durable and economic. All our products can be used for diverse applications and tailored to the requirements of your building site.

National technical approvals and/or verified typical calculations are available for all our props, which means that time-consuming calculations are unnecessary.

Advantages

  • Easy to use
  • The right prop for every application
  • Compatible
  • National technical approval or verified typical calculations

The TITAN props & legs

Telescopic prop
TITAN S

  • Extended lengths and permissible loads:
    • Size 2: 1.80 – 3.00 m
      21.0 – 37.4 kN
    • Size 3: 2.30 – 3.50 m
      17.1 – 37.4 kN
    • Size 4: 2.60 – 4.00 m
      22.1 – 40.4 kN
    • Size 7: 4.00 – 5.50 m
      13.2 – 31.9 kN
  • Steel prop, painted or galvanized
    (sizes 2 and 4)
  • Internal, protected thread
  • Proven worldwide use over decades
  • National Technical Approval Z-8.311-998
On Request

Telescopic prop
TITAN E35

  • Extended lengths and permissible loads:
    • 2.05 – 3.50 m, 31.3 – 41.5 kN
  • Steel prop, galvanized
  • Internal, protected thread
  • For common floor heights in residential and commercial buildings
  • National Technical Approval Z-8.311-1003

Adjustable leg
TITAN HV

  • Extended lengths and permissible loads:
    • TITAN HV: 1.75 – 3.05 m, 23.9 – 96.1 kN
    • TITAN Maxi: 2.95 – 4.25 m, 15.9 – 53.6 kN
  • Steel screw jack, aluminium outer tube
  • Extendable
  • Includes slot for connecting ledger frames
  • Heights up to 6.10 m as support tower
  • National Technical Approval Z-8.312-938

Adjustable aluminium leg
TITAN

  • Extended lengths and permissible loads:
    • Size 2: 1.70 – 2.90 m, 54 – 128 kN
    • Size 4: 2.90 – 4.10 m, 36.7 – 128.0 kN
    • Size 6: 4.30 – 5.50 m, 25.6 – 58.7 kN
  • Screw jack and outer tube completely in aluminium
  • Extendable
  • Includes slot for connecting ledger frames
  • Heights up to 24.60 m as support tower (special heights possible on request)
  • National Technical Approval Z-8.312-868
  • Aluminium telescopic prop according to DIN EN 16031

Heavy duty prop
TITAN SLS

  • Adjustable, 1.80 – 4.80 m, max. 250 kN
  • Aluminium heavy-duty prop for refurbishment works with predefined prop loads
  • Required preload can be set exactly
  • Integral pressure gauge allows full control
  • Basic components taken from TITAN aluminium Megashore system
On Request

Downloads
for TITAN props

More detailed information about our products is available here. In addition to the freely available downloads, many more downloads are available to registered users.

Freely available
Downloads

Further
Downloads

This section contains more detailed information about the applications for our products plus instructions for assembly and use.

Register

References
TITAN props

Applications
TITAN props

Additional product recommendations
from ISCHEBECK TITAN

TITAN slab formwork systems

Discover more

TITAN Aluminium megashore system

Discover more

TITAN WK wall-mounted supports

Discover more

Contact

Are you looking for a partner to provide advice for your building site? Do you have questions regarding a product?