TITAN WK wall-mounted supports
Carrying loads while keeping the floor clear

TITAN WK wall-mounted supports represent alternatives to conventional centering where elaborate and expensive temporary foundations would otherwise be necessary and openings must be kept clear for traffic. The support block for each wall-mounted support is fixed in place with a cast-in screw anchor that can be recovered afterwards. The structure is therefore supported on the wall-mounted supports fixed to the concrete wall cast in advance.

Advantages

No need for protection against impacts
Can be fixed at any height
Ideal for creating large access openings
Few parts
Fixed in place with cast-in, recoverable screw anchors
National Technical Approval Z-21.6-2001

All TITAN WK wall-mounted supports

Aluminium wall-mounted support
WK 1000

For loads up to 100 kN
Low weight allows manual installation, even in places with difficult access
Verified typical calculations
Weight 27 kg

Steel wall-mounted support
WK 2000

For loads up to 240 kN
Ideal for very long spans, e.g. over access openings
Entire superstructure formwork can also be moved as one unit.
Verified typical calculations
Weight 150 kg

Screw anchor
TITAN

Made from quenched and tempered steel
Recoverable
Ensures high axial and shear strengths
Can be cast in during concreting or subsequently inserted in a core-drilled hole
After removal, no metal parts remain in the concrete

Downloads
for TITAN wall-mounted supports

More detailed information about our products is available here. In addition to the freely available downloads, many more downloads are available to registered users.